Primer paint how many coats

Its commonly found in bathrooms, kitchens, or any places that might have humiliation or water build-up. This will only need one coat of primer as the primer can easily cover the drywall and give you a great canvas for the new paint. Keep in mind if you have a very dark color you might still need an extra coat of primer. Priming directly over drywall is one of the best ways to get a great look.

When painting directly over drywall, it will only need one coat of primer. This is because of how well the primer adheres to the wood. This will help the primer and new paint stay on much longer. Unpainted wood is just like painted wood. This is great to hear for anyone that's looking to do an affordable yet quality paint job. When you paint over a dark color such as brown, black, maroon, etc.

For example, if you have a dark brown wall and you put one coat of primer. Or fake wood? IN any case, you need to make sure it does not flake off whatever the top coating is so use Prime Lock from Ben Moore. Link is here. Hi, Painting many 70 year old interior double hung windows with lots of wood muttons 8 over 8 windows!

Fairly glossy. Would like to use Regal Select pearl dove white as top coat and current color is white. I have some Stix and Ben Moore oil primer and fine buying others if a better choice. Should I use on the bare wood areas, Stix on the somewhat glossy areas, on everything, or something else? Also should I use a liquid deglosser instead of sandpaper?

Finally, is it important to lightly sand after the primer and after the first lates topcoat? Thanks so much! In reverse order, yes I sand between primer and top coats to knock off little particles. But you must sand or de-gloss. If you have lead, read this and consider Lead Block. In any case, use the best respirator you can find, not just some mask. There is a test here. Better yet, strip it all! GOod luck, b.

There is mildew on the walls but so far not on the ceilings. Where holes were punched in the walls, we can see they are drywall or look like drywall. They are lightly textured. Areas under windows where renters had AC units or left open to the rain are bubbled up and covered in a dark something that may be mold. I plan to remove and replace drywall there but these areas may account for the moisture causing mildew all over. That said, I want to paint the ceilings with a paint that resists mold and mildew.

Listen, I usually give advice on how you can do all sorts of painting yourself, and yes, you probably can do much of this yourself…but please!

Hire a pro to do the prep. Find an OLD guy or gal who has seen it all. Not some young buck.. In the very least case, bring at least 3 painters over and talk it through: what exactly is the procedure? How do you do this? Pick brains. Then decide if you can do it yourself. You may need to rip out all that drywall…probably so. It may be moldy inside.

But do it now and bite on a bullet when you pay the bill. Better not to have many many problems later! Good luck, B. Hi Brad 8 months ago I primed an interior door previously varnished with a latex primer. Finally I am ready to paint over the primer but it easily scrapes off. Do I have to sand all the primer off so I can reprime the door or just reprime the door? Yes, sorry to say. I think your primer could not bond with your old door.

Then you will be able to forget all this nasty business forever! I assume we need to use a primer — if so, what do you recommend? Is that okay? You could spot prime stians if any. But the Zinsser is going to be fine…use the water-based, not oil or alcohol-based Hope that helps. Once cabin exterior is wooden siding and the other one is stucco. If I prime with a single coat of Kilz 2, it will save me a lot of money and time.

Will this suffice? I think so, yes. I would think any oil-based primer would be best. If the wood is pine SPF then especially so use oil primer. For the stucco, not so important. Use the best topcoat you can afford and at least two coats or more. Good luck, Brad. HI, do you have any tips on what primer to use prior to interior limewash application? Additionally, how can you tell when its had enough coverage for the lime wash to stick? Should no underlying color show through? Sorry, I have no experience with lime wash.

I need to do an article on it.. Look around, esp. Hi, I am repainting interior walls, and started priming with Killz 2 All-Purpose primer. My final paint color is a yellow-tinted white.

Do I need two primer coats to better cover the gray? Thanks for your help! Do 2 coats. Good luck b. Or is there a better primer to use? Thanks for any advice! One coat should be enough.

Always test is my rule, but sometimes resins take a year or more to bleed thru. So go with great top coat paint. I like Advance.

See my post on trim paint. Looking to paint the textured walls in our new house that have glossy latex paint on them. Sanding would be uneven at best because of the texture. Do we need to use a high bonding primer or would a regular one work? Given household sensitivities, we would prefer a zero VOC primer, which does not seem to be an option for high adhesion primers.

You are in luck. This is one of the easiest questions in all my years. I mean it never hurts, but two coats of paint is going to be fine: this is assuming you are correct in that you have LATEX. So for latex on latex, just dust and cut and roll. VOC free primer. The sunroom was added after the house was built so the back wall is exterior aluminum siding, and this is the wall I am painting.

The aluminum siding had some stains and it had been painted with an exterior paint many years ago. The new color we are doing is slightly darker and much more vibrant than the old color.

If there is not metal requires metal primer showing, and it has latex, you are all set to paint. If you have skips in the primer, make sure they cover the old paint at least a film. So no, a 2nd coat of primer not really necessary but would not hurt. Exterior paint is softer and moves with temp, but interior paint will crack!

To get more painting advice for your next painting projects, click the link below. See Painting Tips. Glidden Color Coach.

However, this works best when painting white ceilings with white primer and paint. If the ceilings were painted a darker color, you may need to use 2 coats. As a rule, the interior requires 2 coats of paint over primer. However, you may choose to go with only 1 layer of paint in some circumstances.

This depends on the type of paint—cheaper paint almost always needs to be applied in several coats. If you like the look, a single coat of paint will get the job done in some interior spaces.

However, a second coat will almost always increase the durability and longevity of the job. Using cheap paint—or applying less than 2 coats—is typically a recipe for disaster. A single coat of paint exposed to the elements is prone to fading and peeling quickly. Make sure to apply 2 coats of trustworthy paint over your primer. Wait at least 24 hours after priming before painting with the color of your choice. Primer requires 24 hours to fully cure.