What happens if you get headphones wet

After getting wet with your earbuds, do not waste your time. Try to follow the right steps for decreasing the percentage of damage to that device. So, what is the right way to fix water-damaged earphones? What should do next? Simply follow our guideline step by steps-.

First of all, you should keep the attachable parts the rubber or silicone tips and sleeves in a soft place removing them from your headphones. Then, you should focus on the drivers of the headphones. If you do not follow the next steps adequately, it can be damaged. To take out that part, you can use your knife or a little screwdriver. Maximum numbers of headphones do not use any screw to open it.

So, it is complex to open it. After opening the earbuds by using a knife or screwdrivers, exhibit the internal elements. Keep your device in a full glass of distilled water.

You can use also de-ionized. Maybe you are gassed to hear it. Keep the earbuds in the glass of distilled water that is wet and shake it when it is still there. The main reason for doing that is- the water in the earbuds can get mixed up with distilled water.

By doing that non-stop, hopefully, In Insights there will be just distilled water. Shake the device and drivers as much as you can to remove the water droplet. Clamp the two drivers with your part and shake them several times so you can eliminate water droplets to improve the drying process. Note: Never try to use the Hair Dryer for drying purposes. Because It harms the lifespan of earphones. An Air Blower machine can be used for this purpose. But you have to maintain long-distance from the earbuds while blowing air.

An air blower produces too much air which can damage your earbuds. So, be careful while doing this step. Note: If you can not maintain distilled water at home, you can skip step-3 and directly follow step To keep all the inner parts of the earbuds, use a soft dry towel. It will help to reduce the extra wet and distilled water drops. Maintain this way for all other components and drivers of the earbuds. The most important step among all these steps is to use a rice bag to fix water-damaged headphones.

Open a bag of rice uncooked rice from your kitchen and keep all the components of the earbuds in that bag. The same impurities that cause water to be conductive are also responsible for raising its pH level acidity and can make certain types of metal at risk of corrosion.

For example, contaminants like chemicals and minerals make water corrosive to most metals, while organic matter specifically targets carbon steel. But they all do one thing: corrode metal parts. However, corrosion is a slow process and your headphones can be asymptomatic for days. There are some cases when headphones get soaked with water but survive, only for them to ultimately fail days later.

The problem lies in the chemicals and minerals present within them. For example, seawater is very corrosive thanks to its high salt content, while deionized water is benign for most metals except carbon steel.

Tap water, on the other hand, is somewhere in the middle of those two, with a pH level of 7. Lastly, distilled water is the safest for electronics as all its contaminants were removed through various rigorous processes.

Meanwhile, deionized water is run through a series of procedures where all its positive and negative ions, which are both considered contaminants, are removed. But unlike distilled water, organic matter is not filtered.

While distilled water is generally safe, it can easily be exposed to chemicals and various minerals that can potentially damage your headphones. There are several ways to restore waterlogged headsets. An important prerequisite in fixing your headphones is to wipe off the excess water with a dry towel. By wiping the visible wetness, the risk of more water getting in is substantially lessened.

Prepare a dry towel, preferably cotton. Their foams easily absorb liquid like sponges. For earbuds: simply apply some gentle force to pull the tips off the earpieces. Some may require a bit of twisting, depending on your earbud model. Air dry them later on a soft towel. Unlike ear tips, removing the headphone ear pads is a bit more challenging.

While some ear pads are detachable and easily pop right off, other ear pads are glued and may require a prying tool. But a flathead screwdriver or blunt knife will also do the job nicely. Using tool to remove earpads. Removing earpads. Earpads removed on one side.

This may seem like a daunting task, but dismantling your headphones is the only way to remove the water inside. How you will go on about this will depend on the brand and model. However, as mentioned, different brands and models have different ways of dismantling them. For example, here are some guides on how to dismantle some of the most famous headphone brands:. However, disassembling your headphones requires a bit of technical knowledge and steady hands.

You can go to a professional to do it for you. They know exactly what to do and they already have the necessary tools to fix and disassemble your headset. The main concern is, Will the earphones get damaged?

Another concern is how to dry the earphones. Then also, there is some concern on whether one could get electrocuted using wet earphones or when using earbuds while taking a shower. Proceed to air dry or dry with desiccant and use them only once dry. Note that I may use the terms headphones, earphones, and earbuds interchangeably when discussing generalities for the sake of expediency. The first thing you need to do if your headphones or earphones get wet is immediately take them out of the water.

This is important because further exposure to water increases the chances of moisture getting inside the circuitry. If moisture gets inside the circuitry, there is a possibility for your earphones to get damaged. Impurities in the water may cause a short circuit inside your earphones. This could burn or break the circuit, damaging your earphones beyond repair.

The electrolytes in the water or other liquid conduct electricity. So, it is of utmost importance that you remove the earphones immediately from the water or any other liquid. There are also various ways to dry them. If you removed the earphones from the water immediately, the water probably only reached the outside parts. First, remove the rubber or silicone sleeve covering the speaker and wipe it dry with a soft cloth or paper towel.

Set it aside. Shake the earphones slightly to shake off water droplets. The physical force of shaking dislodges water droplets from where they are sticking on the earphones. Then wipe the earphones with a soft cloth or paper towel, applying a little pressure on the speaker mesh to dry it out. Do not hit or strike the earphones on any surface to shake off water, as this might cause shock waves inside the earpieces and damage the tiny speaker system inside.

Slightly shake or jiggle the earpieces freely in the air. Blow-dry air on the earphones using your mouth. This also helps remove other tiny water droplets that may be trapped inside. If your earphones got submerged in water for a longer period of time, it would take longer to dry. If, say, your earphones got washed together with your clothes or fell in a swimming pool, water may have entered inside the holes and creases. The same procedure above will remove much of the water droplets outside the earpieces: Shake off the water droplets from the earphones.

Then pat them dry with a soft cloth or paper towel. Finally, blow dry air on the holes and creases using your mouth. However, it will require a longer time to dry to remove all the moisture left inside the earphones. If your earphones got submerged in dirty water or other liquids, it is recommended that before drying them out, immerse the earphones twice in distilled water. Shake or jiggle the earphones while underwater to clear out the dirty water other liquids.

Then shake off any excess water droplets attached to the earphones, pat them dry with a soft cloth, and blow dry air into the speaker mesh using your mouth or soft pressurized air.

After doing this, place the earphones on a soft cloth or paper towel. An electric fan will help circulate dry air around the earphones. Do not use a hairdryer because its high temperature might damage the insides of your earphones. Most importantly, do not microwave your earphones! You can also place the earphones inside a resealable plastic bag or Ziploc together with any available desiccant e.

The desiccant will draw away the residual moisture from inside the earphones.